API 600 Gate Valve – API 600 Valve Trim Chart | ZECO Valveback seating valve

air ball valve

lp ball valve

ball valve seats

4 ball valve

ZECO Valve is a proud industrial API 600 cast steel gate valve manufacturer. Our stainless steel gate valves, carbon steel gate valves, and alloy steel gate valves are available in all trim configurations.

What is API 600 Standard?

API 600 covers bolted bonnet steel gate valves for the petroleum and natural gas industries, specifically where “corrosion, erosion, and other service conditions indicate a need for full port openings, heavy wall sections, and extra large stem diameters.”

API 600 specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion, and other service conditions would indicate a need for full port openings, and heavy wall sections, and large stem diameters.

API 600 sets forth the requirements for the following gate valve features:
— bolted bonnet;
— outside screw and yoke;
— rising stems;
— non-rising handwheels;
— single or double gate;
— wedge or parallel seating;
— metallic seating surfaces;
— fanged or butt-welding ends.

It covers valves of the nominal pipe sizes DN: — 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050;

corresponding to nominal pipe sizes NPS: — 1, 1-1 /4 , 1-1 /2 , 2, 2-1 /2 , 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42; and applies to pressure class designations: — 150, 300, 600, 900, 1500, 2500.

What is an API 600 Gate Valve?

API 600 gate valve is an on-and-off type of gate valve used. This valve is used for opening and closing the flow of fluid in a pipeline. API gate valve is a bidirectional flow valve. This means that the flow of fluid through the valve can take place in either direction. API gate valve manufacturers design the valve such that one end can act as the inlet enabling the fluid to enter in any direction. An API 600 gate valve is characterized by a large diameter size (between 2 and 80 inches), a cast steel body, heavy wall thickness, and a flat sealing surface between the gate and the seat. API 600 gate valves are mostly used in the petroleum and gas industry, especially in applications where the minimum pressure drop is desired for smooth operation. This kind of valve is not used for the regulation of flow rate. The term “API 600” represents an American standard for the design of gate valves meant for petroleum industry applications. This standard specifies the design criteria for cast steel (carbon and alloy steel) gate valves and also dictates the geometry and sizes of the gate valve in terms of body and bonnet thicknesses, dimensions, joint, yoke, bolting, and auxiliary connections.

Materials of API 600 Gate Valve

  • Body: ASTM A216 WCB
  • Trim: 8#
  • Stem: ASTM A182 F6A 
  • Wedge: WCB + 13Cr 
  • Body Seat: A105 + Stellite
  • Stem Packing: Graphite
  • Bonnet Gasket: SS 304 + Graphite

API 600 Trim Chart

TrimMaterialSeatDiskBackseatStemNotes
1410410410410410 
2304304304304304 
3F310310310310310 
4Hard 410Hard 410Hard 410410410seats 750BHN Min.
5HardfacedStelliteStellite410410 
5AHardfacedNi-CrNi-Cr410410 
6410 and Cu-NiCu-Ni410410410 
7410 and Hard 410Hard 410Hard 410410410seats 750BHN Min.
8410 and HardfacedStellite410410410 
8A410 and HardfacedNi-Cr410410410 
9MonelMonelMonelMonelMonel 
10316316316316316 
11Monel and HardfacedStelliteMonelMonelMonel 
12316 and HardfacedStellite316316316 
13Alloy 20Alloy 20Alloy 20Alloy 20Alloy 20 
14Alloy 20 and HardfacedStelliteAlloy 20Alloy 20Alloy 20 
15304 and HardfacedStelliteStellite304304 
16316 and HardfacedStelliteStellite316316 
17347 and HardfacedStelliteStellite347347 
18Alloy 20 and HardfacedStelliteStelliteAlloy 20Alloy 20 

Features of API 600 Gate Valve

  • Universal trim: 13Cr stem, wedge in CA 15 or 13Cr faced, and CoCr alloy faced seat API Trim 8 suitable for applications up to 850°F (454°C).
  • Seat faces CoCr alloy hardfaced, ground, and lapped to a mirror finish.
  • Flexible wedge with low center stem-wedge contact, in solid CA15 (13Cr) or hardfaced with 13Cr, SS 316, Monel, or CoCr alloy. Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage.
    • A CoCr alloy hardfaced CF8M wedge is also available.
  • Non-rotating stem with precision Acme threads and burnished finish. Double Acme for faster operation.
  • Body and bonnet joint accurately machined.
  • Body and bonnet castings are precision machined.
    • One-piece bonnet for better alignment and fewer parts for Class 150 up to NPS 16 (DN 400).
  • Flanges:
    • ASME Classes: 150–300: 1⁄16” raised face
    • ASME Classes: 600–1500: ¼” raised face
    • Finish: 125–250 AARH for all valves.
  • Rotating stem nut is Austenitic ductile iron Gr. D-2C renewable in line (as shown).
  • When the handwheel is used, thrust bearings are supplied as follows:
    • ASME Classes 150–300: NPS 10–12 (DN 250–300), 1 bearing (top)
    • NPS 14 (DN 350) and up, two bearings
    • ASME Classes 600–1500: NPS 6 (DN 150) and up.

ZECO Valve

Gate Valve Manufacturer – Various Gate Valve Types

What is a Gate Valve?

Difference Between Gate Valve And Butterfly Valve

Gate Valve vs Ball Valve

Gate Valve Repair

Ten articles before and after

API 6D Floating Ball Valves and Soft Sealing Swing Check Valves – Zeco Valve | Industrial valve manufacturer

Cryogenic Swing Check Valves for a Low Temperature of -196℃ – Zeco Valve | Industrial valve manufacturer

The Improvement in the Hard-seal Trunnion Ball Valve for the Coal Chemical Industry (Part One) – Zeco Valve | Industrial valve manufacturer

The Improvement in the Hard-seal Trunnion Ball Valve for the Coal Chemical Industry (Part Two) – Zeco Valve | Industrial valve manufacturer

Welded Flange End Angle Globe Valves in ASTM A182 F316 – Zeco Valve | Industrial valve manufacturer

DIN Small Size Globe Valves in Forging Materials – Zeco Valve | Industrial valve manufacturer

Aluminum Bronze Valves in ASTM B148 C95500, ASTM B150 C63000 – Zeco Valve | Industrial valve manufacturer

DIN Globe Valves with Small Sizes in Casting Materials – Zeco Valve | Industrial valve manufacturer

News – 5 Electric Ball Valve Manufacturers In USA | API approved valve manufacturer

News – The Difference Between Solenoid Valve And Miniature Motorized Valve | API approved valve manufacturer