replace gate valve with ball valve
hot tub gate valve
valterra 1 1/2 gate valve
The demand for industrial valves is increasing day by day, due to the increasing population and growing Industries. Here in this article, we have provided you a few of the top Valve manufacturers in UK. They are not only the domestic suppliers but exporting their finished goods to international markets.
Top Ball Valve Manufacturer In UK
Ball valves are the key instruments for shutting down and regulating the flow of fluids (oil, gas, steam, etc.). The ball within the valve has a hole into which, when connected with the two ends of the valve, the liquid flows freely. The valve is perfectly shut until the opening is fully perpendicular to the ends of the device. Otherwise, the flow is entirely or partly blocked if the hole is in a certain location (for example, the flow stops perpendicular to the valve).
BEL Valves, Newcastle Upon Tyne, England, UK
Established: 1964
Website: https://www.belvalves.com/
Valve Types: Top Entry, Side Entry Ball valve.
Certification: ISO 9001:2015, API Specification Q1, Etc.
BEL Valves design produces and maintains highly capable valves and actuators for subsea, land, and offshore applications. BEL’s comprehensive portfolio of valves covers subsea and surface via pipe slab and gate valves, high integrity ball, rotary disc, check, needle, butterfly, and globe valves. They also supply a variety of pneumatic, hydraulic and electrical actuators, including regulators, accumulators, and hydraulic power units (HPUs).
Top Gate Valve Manufacturer In UK
A gate valve refers to a valve whose lock member (gate) travels in the vertical direction of the middle line of the passage, consisting mostly of a valve body, a lid, a shaft gate, a sealing container, a handwheel/gearbox, and other parts. Normally, the two ends of the valve are attached to the flange pipe through studs and nuts. The gate valve can only be used as a shut-off valve and cannot be regulated and throttled. There are two types of gate valve sealing: self-sealing and forced sealing.
Edmund Valve Company Ltd., South Wales, UK
Established: 1965
Website: https://www.edmundvalve.com/
Valve Types: Cast steel gate valves.
Certification: ISO 14001, etc.
Edmund Valve Company specializes in the manufacture of quality cast steel gate valves. Present in sizes from 1/2′′ – 48′′ and level scores from 150 to 2500. Our cast steel Gate valves can be fabricated in Raised Face (RF) and Ring Type Joint (RTJ) as specified in ANSI B16.5 and Butt Weld (BW) as specified in ANSI B16.25. Other terminal connections are available on request.
Top Butterfly Valve Manufacturer In UK
Butterfly valves are ideal for pipelines with wide diameters (such as DN > 600 mm) and short structural distances, as well as for quick flow control and rapid opening and closing requirements. They are commonly used for water, oil and compressed air, and other mediums with a temperature of ≤80°C and pressure of ≤1.0MPa. Compared to gate valves and ball valves, butterfly valves are ideal for pipeline systems with a lower pressure loss due to their comparatively high-pressure loss.
Eurovalves (UK) Limited, Sheffield, England.
Established: 1992
Website: https://www.eurovalve.co.uk/index.html
Valve Types: Resilient Seated, High performance, High Integrity, Etc.
Certification: ISO 9001:2015, Etc.
Eurovalve is the primary agent for Watts’ Socla and Eurotorc butterfly valves, all well-known and reputable companies in the market. They provide a wide variety of butterfly valves, resilient, high integrity and high performance, designed for a wide range of tasks. Valves are available manually operated or operated (pneumatic and electrical) for on/off insulation and modulating functions.
Top Globe Valve Manufacturer In UK
The Globe valve is used to shut off the flow of the medium and is ideal for applications that need to be throttled regularly. The most widely used is chemical processing. The valve disc and the valve seat are the locking components of the globe valve. To shut the valve firmly, the corresponding surface of the valve disc and the valve seat can be grinded and corrosion-resistant and wear-resistant components such as Stellite 6 and stainless steel should also be welded to the sealing surface. The valve disc and the valve stem of the globe valve are designed to provide a versatile connection for the valve disc and the valve stem fitting.
Lead Valve (UK), London, UK.
Established: 1970
Website: http://www.leadvalve.co.uk/
Valve Types: DIN Bellows, API Globe Valve, Etc.
Certification: API/BS/EN/AWWA/ISO etc.
LEAD (UK) is a technology-based company and has begun valve engineering within Oil & Gas Sector, and after 8 years of growth, LEAD (UK) has started a workshop on industrial pipeline valves and has expanded the range of products with Gate/Globe/Check Valves step by step for Oil & Gas and Water Works Treatment. In 2008, Lead Valve increased its production capacity to suit its rising global markets. Global valve products include Iron, Steel, and Special Alloy materials with international specifications such as API/BS/EN/AWWA/ISO, etc.
Top Check Valve Manufacturer In UK
Check valves are often referred to as non-return valves, reflux valves, retention valve, or one-way valve. This type of industrial valve is automatically opened and closed by the force produced by the movement of the medium itself in the pipeline, which can be classified as an automatic valve. Check valves are used in pipeline systems, their key functions are to prevent the medium from flowing out to prevent the pump and its piston from reversing, and to prevent the medium from flowing back from the container. The control valve may also be used to replace the auxiliary system where the pressure can increase above the pressure of the main system.
Goodwin International Ltd, Stoke-on-Trent, UK
Established: 1949
Website: https://www.checkvalves.co.uk
Valve Types: Dual Plate, Axial, Non-slam Check Valve, Etc.
Certification: ISO 9001, ISO 14001, ISO 45001, etc.
Goodwin International Limited, globally known and industry leader in the design, production, and sale of Dual Plate Check Valves for use in the world’s hydrocarbon, oil and process industries, added the Goodwin Axial Check Valve to its portfolio of valve control solutions in 2007.
Top Solenoid Valve Manufacturer In UK
Electromechanical regulator or Solenoid Valve commonly used to regulate the flow of liquid or gas. There are different types of the solenoid valve, but the major models are either pilot-operated or direct-acting. Pilot-operated valves, the most commonly employed, use system line pressure to open and shut the main orifice in the valve body.
Burkert UK Limited, Gloucestershire, England, UK.
Established: 1946
Website: https://www.burkert.co.uk/en
Valve Types: General Purpose, Water, Steam, High Pressure, Cryogenic solenoid valve, Etc.
Certification: ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, Etc.
Bürkert Fluid Control Systems is among the leaders in the production of fluid and gas measurement, control, and regulation systems. Bürkert products are used in a broad variety of industries and applications – from breweries and laboratories to medical, bio-engineering, and aerospace technologies. With a portfolio of more than 30,000 products, Bürkert is the only provider to sell all parts of the fluid control system: solenoid valves, process, and analytical valves, as well as pneumatic actuators and sensors.
Top Y Strainer Manufacturer in the UK
Y-Strainers are instruments for the mechanical separation of unnecessary solids from liquid, gas, or steam lines using a perforated or wire mesh strainer. They are used in pipelines to secure pumps, meters, control valves, steam traps, regulators, and other process machinery.
Y-Strainers are used in a broad variety of liquid straining applications to secure downstream process device components in a wide range of industries.
Barton Firtop Engineering Company Limited, Worcestershire, UK.
Established: 1973
Website: http://www.bartonfirtop.co.uk/index1.htm
Valve Types: Screwed, Flanged, Socket Weld Y-Type Strainer, Etc.
Certification: ISO 9001:2015, ISO 3834-2:2005, ISO/TS 29001:2011, ISO 14001:2015, OHSAS 18001:2007, SSIP and Safe Contractor Approved.
Barton Firtop is a specialist in ‘Strainer and Filtration Technology.’
Barton Firtop is a globally recognized brand. They are actively developing ‘green technologies’ using 3D Modeling, Computational Fluid Dynamics (CFD), and Finite Element Analysis (FEA), with complete validation through their live flow test rig. They are makers of Filters, Strainers, Coalescers, Separators, Pressure Vessels, Flame Arresters, Sight Glasses, Static Mixers, and Spools.
Summary
There are many valve manufacturers in the UK. This offers you a wide variety of different choices when selecting a flow control valve for your application. With the continuous growth of new modern valve producers, these firms are under pressure to continue the output of valves with very high standards. This makes it more difficult to find the best valve maker to suit your needs. We have listed a few valve manufacturers in the UK to ease your search.